2007 - Pres. JKU [4 door]
2007 - Pres. JK [2 door]
2004 - 2006 LJ
1997 - 2006 TJ
1987 - 1995 YJ
RRD 2.0 Shocks
RRD 2.625 Shocks
RRD 2.625 Coil Over
Krawl Free Org.
Rock Krawler News Sign-up
XJ Rear Coil Conversion
FOR INFO OR TO ORDER:
Find A Dealer
click here for Shock Options
How To Order - SKUs
The Rock Krawler rear coil conversion system consists of a triangulated 4 link arrangement with high clearance lower control arms. The rear upper coil mounts include the rear shock mounts and a built in adjustable bump stop. The rear lower control arm mounts include the rear lower shock mount. All rear brackets key off factory positions so there is absolutely no guess work. This system gives you the highest ride quality and offroad ability available anywhere for an XJ! All hard parts come with our exclusive abuse proof lifetime guarantee!
Rear Coil Spring Conversion
Excellent Highway Ride and Handling
High Clearance Lower Control Arms
Anti-Squat Geometry for unparalleled climbing ability
Can be used to provide 4.5" or 6.5" of lift
Limited Lifetime Warranty
Two rear upper high misalignment/double adjustable control arms made from solid alloy steel
Rear triangulated four link mounting cradle/axle truss made from 1/4" thick laser cut steel
Coil spring mounting brackets made from 1/4" thick/laser cut steel for the rear, hardware and detailed instructions.
It is recommended that high quality shocks be used with all Rock Krawler Suspension Systems. At a very minimum an adjustable dampening rate shock such as a MX-6 or RS9000 so you can choose your ride quality!
- 14.5" Collapsed to 24.5" Extended
Reference MX6027 with Daystar EVS Jounce Stop for 6.5" lift systems
For Example a SKU Number Would Be
Use 35 for Dana 35's, Use 44 for Dana 44's, Use 60 for Dana 60's, Use 88 for Ford 8.8's, Use 90 for Ford 9 Inch.
* Available for most common rear axles
** Requires a SYE with C.V. Driveshaft Conversion
*** All brackets requiring welding bolt into place using factory fasteners and locations and can be welding in prior to disabling the vehicle and completing the installation.
**** Requires new cat-back exhaust system.
***** Requires a 2" lift TJ rear coil for rear coil spring to work for 6.5" XJ systems.
Share your knowledge of this product.
Be the first to write a review »